BVP Process(Pump Drive) - ISMATEC- 정량펌프 전문 레보딕스(주)

 

*ISMATEC제품 : Tubing pump / Tubing / Peristaltic pump *

ISMATEC의 강력한 액체 이송용 Pump Drive를 소개해 드리겠습니다.

 

★ IP65-rate로 높은 방수율을 보이는 Pump
★ Stainless steel Housing으로 내부 부식이 없음
★ 20개가 넘는 다양한 Pump-Head 장착 가능
★ 최대 24 Channel까지 동시 구동 가능
★ Ceramic piston Pump-Head까지 장착가능
★ 강력한 이송용 Pump
★ Analog interface
★ Flow rate : 0.001 - 3700 ml/min

 

 

<Ordering Information>

Ordering Information

Order No. for this drive ISM 920

Interchangeable pump-heads

<Specification>

Flow rates	< 0.001 – 3700 ml/min (depending on mounted pump-head)
Channels	1 – 24 (depending on mounted pump-head)
Operating panel	- 7-button membrane key-pad - LED display
Speed	1 – 240 rpm
Speed setting	rpm, resolution 0.1 rpm
Speed control	closed loop control for pressure independent speed
Analog input	Speed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog output	Speed monitoring (0–10VDC or 0–7.2 kHz)
Digital input (TTL level)	Start/Stop, rotation direction, autostart
Differential pressure	1.5 bar (21.7 psi) possible (depending on pump-head and tubing material); small tubing diameters may allow higher pressures
Motor type	DC motor
Power consumption	100 W
Power supply	100 – 230 VAC / 50 – 60 Hz
Protection rating	IP 65
Depth / Width / Height	220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10 ¼") (without pump-head)
Weight	6.9 kg (15 lb) (without pump-head)
Accessories	foot switch

 

레보딕스(주) TEL : 031-790-1907 FAX : 031-790-1908 www.revodix.co.kr  (홈페이지를 방문하시면 더 다양한 제품들을 만나보실 수 있으십니다~ Go Go)