본문

REGLO Digital(Tubing pump) - 정량펌프 전문 레보딕스(주)

 *ISMATEC제품 : Tubing pump / Tubing / Peristaltic pump *

 

 

ISMATEC 대표 펌프 REGLO 시리즈중 REGLO Digital 제품대해 소개해 드리겠습니다

 

★ Tubing pump중 가장 기본적인 펌프로,

    2~4channel

    4~12 roller로 다양하게 구성 가능 합니다.

 

★ Analog model과 성능은 같습니다.

    일반적으로 Digital model을 많이 사용합니다.

★  3-stop color-coded tubing 사용(타사와 호환가능)

★ 다양한 재질의 tubing 선택 가능

 

★ MS/CA Click'n'go cassettes를 이용한 간단한 tubing 탈부착 가능

★ Flow rate : 0.002~68ml/min(각 채널당)

★ RS232 Remote controll

 


 

<Ordering Information>

Model Order No. Channels Flow rates
ml/ min per channel
Pump
rollers
REGLO Digital MS-2/6 ISM 831 2 0.003 – 68 6
REGLO Digital MS-2/8 ISM 832 2 0.002 – 57 8
REGLO Digital MS-2/12 ISM 596 2 0.002 – 38 12
REGLO Digital MS-4/6 ISM 833 4 0.002 – 43 6
REGLO Digital MS-4/8 ISM 834 4 0.002 – 35 8
REGLO Digital MS-4/12 ISM 597 4 0.001 – 24 12

6 rollers = higher flow rate
12 rollers = less pulsation 

 

<Specification>

Tubing type 3-stop color-coded tubing, 0.13 3.17 mm i.d. (for 2 channels)
3-stop color-coded tubing, 0.13 3.17 mm i.d. (for 4 channels)
Tube-bed MS/CA Click'n'go cassettes
- simple handling
- automatic occlusion setting
- defined and reproducible occlusion conditions
- each channel allows individual tubing selection
Operating panel - 6-button membrane key-pad
- LED display
Operating modes - pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- factory-set flow rates for all available tube sizes
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- roller back-steps for drip-free dispensing

- reversible rotation direction
Calibrating function - for flow rate (ml/min)
- for dispensing volume (ml)
Rotor speed - 1.6 160 rpm (2-channel versions)
- 1.0 100 rpm (4-channel versions
- adjustable in steps of 0.1 rpm
Speed setting digital speed setting
Speed control closed loop control for pressure independent speed
RS232 interfaces RS232 "in"    - for operation controlling via PC
RS232 "out"  - for cascading up to 8 pumps
Digital input (TTL level) Run/Stop, autostart
Analog output Speed monitoring (08 kHz = 2 channel version, 05 kHz = 4 channel version)
Differential pressure 1.0 bar (14.5 psi) possible (depending on tubing material);
small tubing diameters and/or cassettes with pressure lever allow higher pressures
Motor type DC motor
Power consumption 75 W
Power supply 100 – 230 VAC / 50 – 60 Hz
Protection rating IP 30
Depth / Width / Height 178 x 100 x 135 mm (7" x 4" x 5 3/10") = 2-channel versions
190 x 100 x 135 mm (7 ½" x 4" x 5 3/10") = 4-channel versions
Weight 2.0 kg (5 lb) (2-channel versions)
2.1 kg (5 lb) (4-channel versions)
Accessories - Cassettes
- Foot switch

- Driver for "LabView" software (free download)

 

 

 레보딕스(주)
TEL : 031-790-1907
FAX : 031-790-1908
www.revodix.co.kr
 (홈페이지를 방문하시면 더 다양한 제품들을 만나보실 수 있으십니다~ Go Go)

 

 

 

 

 

 

 

 

 

사업자 정보 표시
레보딕스㈜ | 신종훈 | 경기도 하남시 조정대로 150 하남지식산업센터 아이테코 334호 | 사업자 등록번호 : 206-86-21780 | TEL : 031-790-1907 | Mail : sales@revodix.co.kr | 사이버몰의 이용약관 바로가기

공유

댓글 0