MCP-Z Standard (Magnetic Gear Pump) - Micropump- 정량펌프 전문 레보딕스(주

*Micropump제품 : Gear pump / Magnetic Gear Pump / Pump-head / OEM PUMP*

 

 

Order No. (for drive only) ISM 405		Interchangeable pump-heads

 

★ 강력하고, 저장 및 보정이 가능한 Dispensing pump
★ 4개의 Operating papameter까지 저장 가능
★ 20가지의 교체가능한 Pump-heads
★ RS232 and Analog Interface
★ Flow rate : 1 ~ 7020 ml/min

 

 

 

 

 

<Ordering Information>

Flow rates	1 – 7020 ml/min (depending on mounted pump-head)
Operating panel	- 6-button membrane key-pad - LED display
Memory	4 sets of operating parameters can be stored
Operating modes	- pumping by drive speed (rpm) - pumping by flow rate (ml/min) - dispensing by volume (ml) - dispensing by time (0.1s up to 999hrs) - dispensing by volume within a pre-set time - interval dispensing by volume with a pause - interval dispensing by time with a pause - setting the number of dispensing cycles - pause time setting (from 0.1s up to 999hrs)
Calibrating functions	- for flow rate (ml/min) - for dispensing volume (ml)
Motor speed	60 – 6000 rpm
Speed setting	digital speed setting (resolution 1 rpm)
Speed control	closed loop control for pressure independent speed
RS232 interfaces	- RS232 "in"    - for operation controlling via PC - RS232 "out" - for cascading up to 8 pumps
Analog input	Speed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog output	Speed monitoring (0–10VDC or 0–12 kHz)
Digital input (TTL level)	Start/Stop, autostart
Differential pressure	max. 5.2 bar / 75.4 psi (depending on pump-head)
Motor type	DC motor
Power consumption	150 W
Power supply	115/230VAC; 50/60Hz
Protection rating	IP 30
Depth / Width / Height	220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10¼") (without pump-head)
Weight	6.4 kg (14 lb) (without pump-head)
Accessories	- foot switch
Special characteristics	The rotation direction of Ismatec gear pumps is not reversible

레보딕스(주) TEL : 031-790-1907 FAX : 031-790-1908 www.revodix.co.kr  (홈페이지를 방문하시면 더 다양한 제품들을 만나보실 수 있으십니다~ Go Go)