본문

MCP Process(Pump Drive) - ISMATEC- 정량펌프 전문 레보딕스(주)

 *ISMATEC제품 : Tubing pump / Tubing / Peristaltic pump *

ISMATEC의 강력한 PC-Programmable Dispensing Pump Drive를 소개해 드리겠습니다.

 

★ IP65-rate를 가지면서 programmable 가능한 Dispensing Pump
★ Microprocessor contoller로 정량이 보장 되는 Pump
★ Operating parameter를 4개 까지 저장가능
★ Flow rate와 volume Calibration(검교정) 가능
★ Dosing 및 Filling에 이상적인 Pump
★ 20개가 넘는 다양한 Pump-Head 장착 가능
★ 최대 24 Channel까지 동시 구동 가능
★ Ceramic piston Pump-Head까지 장착가능
★ 강력한 이송용 Pump
★ RS232 Controll 가능
★ Flow rate : 0.001 - 3700 ml/min

<Ordering Information>

Ordering Information
Order No. for this drive
ISM 915
Interchangeable pump-heads

 

<Specification>

Flow rates < 0.001 – 3700 ml/min (depending on mounted pump-head)
Channels 1 24 (depending on mounted pump-head)
Operating panel - 7-button membrane key-pad
- LED display
Memory 4 sets of operating parameters can be stored
Programming
(similar to PLC)
4 individual command sequences programmed in a PC can be stored in  the pump. The user can run the programs using the pump as a stand-alone unit.
Operating modes

- pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- factory-set flow rates for all available tube sizes
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- roller back-steps for drip-free dispensing

- reversible rotation direction

Calibrating function - for flow rate (ml/min)
- for dispensing volume (ml)
Speed 1 240 rpm
Speed setting rpm, resolution 0.1 rpm
Speed control closed loop control for pressure independent speed
RS232 interfaces - RS232 "in"   - for operation controlling via PC
- RS232 "out" - for cascading up to 8 pumps
Analog input Speed control (0–5 or 0–10V / 0–20 or 4–20mA)
Analog output Speed monitoring (0–10VDC or 0–7.2 kHz)
Digital input (TTL level) Start/Stop, rotation direction, autostart, 2 universal inputs
Digital output (PWM) 2 universal outputs
Differential pressure 1.5 bar (21.7 psi) possible (depending on pump-head and tubing material); small tubing diameters may allow higher pressures
Motor type DC motor
Power consumption 100 W
Power supply 100 – 230 VAC / 50 – 60 Hz
Protection rating IP 65
Depth / Width / Height 220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10 ¼") (without pump-head)
Weight 6.9 kg (16 lb) (without pump-head)
Accessories - Progedit software (free download)
- Driver for "LabView" software (free download)

- Foot switch

 

 레보딕스(주)

TEL : 031-790-1907

FAX : 031-790-1908

www.revodix.co.kr

 (홈페이지를 방문하시면 더 다양한 제품들을 만나보실 수 있으십니다~ Go Go)

 

 

 

 

 

 

사업자 정보 표시
레보딕스㈜ | 신종훈 | 경기도 하남시 조정대로 150 하남지식산업센터 아이테코 334호 | 사업자 등록번호 : 206-86-21780 | TEL : 031-790-1907 | Mail : sales@revodix.co.kr | 사이버몰의 이용약관 바로가기

공유

댓글 0