MCP-CPF Process (Rotary Piston Pumps) - ISMATEC- 정량펌프 전문 레보딕스(주)

*ISMATEC제품 : Rotary pump / Piston / Ceramic piston pump / OEM PUMP*

 

 ISMATEC의 정밀한 재현성을 자랑하는 Rotary piston Pump 를 소개해 드리겠습니다.

 

 

★ Process suitable and programmable piston pump
★

 

 IP-65 등급으로 방수가 가능한 Stainless steel housing
★ 강력한 Dispensing용 Pump로 보정 가능
★ 4개의 Operating parameter를 저장가능
★ 10 ~ 1800 RPM까지 속도 범위 조절 가능
★ RS232 와 Analog interface 사용가능
★ Flow rate : 0.025 ~ 2300 ml/min

 

 
 <Ordering Information>

Interchangeable pumpheads
Choose your piston pump-head ...
Pump- heads	Volume/rev.	Flow rates
RH 00 RH 0 RH 1	2.5 – 25 µl 5 – 50 µl 10 – 100 µl	0.025 to 45 ml/min 0.050 to 90 ml/min 0.1 to 180 ml/min
QP Q0 QP Q1 QP Q2 QP Q3	3.2 – 80 µl 12.8 – 320 µl 28.8 – 720 µl 51.2 – 1280 µl	0.04 to 144 ml/min 0.13 to 576 ml/min 0.29 to 1300 ml/min 0.51 to 2300 ml/min

 <Specification>

Flow rates 0.025 - 2300 ml/min (depending on the piston pump-head) Operating panel - 7-button membrane key-pad - LED display Memory 4 sets of operating parameters can be stored Programming (similar to PLC) 4 individual command sequences programmed in a PC can be stored in the pump. The user can run the programs using the pump as a stand-alone unit. Operating modes - pumping by drive speed (rpm) - pumping by flow rate (ml/min) - adjustable stroke volume - dispensing by volume (ml) - dispensing by time (0.1s up to 999hrs) - dispensing by volume within a pre-set time - interval dispensing by volume with a pause - interval dispensing by time with a pause - setting the number of dispensing cycles - pause time setting (from 0.1s up to 999hrs) - piston stroke back-steps for drip-free dispensing - reversible rotation direction Calibrating functions - for flow rate (ml/min) - for dispensing volume (ml) Drive speed 10.0 – 1800.0 rpm Speed setting digital speed setting, (resolution 0.1 rpm) Speed control closed loop control for pressure independent speed RS232 interfaces - RS232 "in"   - for operation controlling via PC - RS232 "out" - for cascading up to 8 pumps Analog input Speed control (0–5 or 0–10V / 0–20 or 4–20mA) Analog output Speed monitoring (0–10VDC or 0–7.2 kHz) Digital input (TTL level) Start/Stop, rotation direction, autostart, 2 universal inputs Digital output (PWM) 2 universal outputs Differential pressure 6.9 bar (100 psi) (depending on pump-head) Motor type DC motor Power consumption 100 W Power supply 100 – 230 VAC / 50 – 60 Hz Protection rating IP 65 Depth / Width / Height 220 x 155 x 260 mm (8 2/3" x 6 1/10" x 10 ¼") (without pump-head) Weight 6.9 kg (16 lb) (without pump-head) Accessories - Progedit software (free download) - Driver for "LabView" software (free download) - Foot switch

레보딕스(주) TEL : 031-790-1907 FAX : 031-790-1908 www.revodix.co.kr  (홈페이지를 방문하시면 더 다양한 제품들을 만나보실 수 있으십니다~ Go Go)